After special processing, the display unit can be assembled into a variety of special-shaped screens, such as inner arc display screen, outer arc display screen, inner circle display screen, S display screen, spherical screen, etc; In order to ensure sufficient brightness of outdoor real project pixels, the front of pixels is sealed with silica gel for waterproof treatment. The color of silica gel can be specially matched against the color card according to the project requirements, so that this is perfectly coordinated with the color of the building exterior wall; Pixel outgoing line is made of high and low temperature Bineng silicone wire with waterproof joint. The fully sealed waterproof structure with elaborate design has a protection grade of IP67, which can adapt to various indoor and outdoor temperature and humidity environments. The working environment can reach - 20 and+80 degrees Celsius, and can be exposed to rain.
The resolution design of the spherical LED display screen is the same as that of the conventional LED display screen, that is, it is related to the viewing distance of the LED display screen. In general, if it is viewed from 2.5 meters away, it is recommended to choose the P2.5 or P2 model, and if it is viewed from 6 meters away, it is recommended to choose P6 or P5. Of course, the budget is sufficient, and you can also choose a higher definition P4 or even P3. If it is used for outdoor viewing 10 meters away, you can choose the P10 model. Of course, this is a relatively vague choice, qualitative rather than quantitative, depending on the specific on-site installation environment, audience, budget and other aspects.
